How do I clean ProPanels or Studiofoam?

Get the most out of your acoustical treatment products, by making them stay looking great for years but using these basic cleaning tips.

Auralex Studiofoam® cleaning Tips and Instructions:

Cleaning Dusty Studiofoam

Light vacuuming of Studiofoam with an upholstery or drapery attachment will remove

accumulated dust and is also suggested for preventative maintenance.

Cleaning Soiled Studiofoam

Avoid the use of harsh chemicals such as Bleach, alcohol or other solvents.
Use a mild detergent, intended for handwashing delicate clothing, diluted with water.
Gently rub the affected area, do not saturate the foam.
Use a dry paper towel or cloth to blot up the excess moisture and let it air dry.

Always test a small, non-visible area before any chemical is used on Auralex products.

Auralex ProPanel cleaning Tips and Instructions:

Cleaning Dusty ProPanels

Light vacuuming of ProPanels with an upholstery or drapery attachment will remove

accumulated dust and is also suggested for preventative maintenance.

Cleaning Soiled ProPanels

Always pretest a cleaning agent on a non-visible part of the fabric first to ensure no damage is done to the fabric or its color. Always follow the manufacturer’s recommendations for using the cleaning agent.
Make sure your hands are free from oil or dirt when handling panels, especially if they are light colored and use in a well-ventilated room. Avoid any product which contains Carbon Tetrachloride or other toxic materials.
Light vacuuming of the fabric with an upholstery or drapery attachment will remove accumulated dust and is also suggested for preventative maintenance.
Oil or grease spots will respond to mild solvent or dry cleaning agents.
Avoid excessive brushing or rubbing to prevent fuzzing of the fabric surface.
For general dirt and grime, sponging with the foam from a mild detergent or upholstery shampoo should remove the accumulated stain. Blot the stain with a clean absorbent cloth dampened with the cleaning solution and work from the outside of the stain to the center. Reapply as necessary.
Room temperature solution should be sufficient.
Rinse well with a clean sponge to remove traces of the water-base cleaning agent. Never saturate the fabric with liquid, use a damp sponge or cloth. Too much liquid could damage the glue bond between the fabric and the panel core material.
Fabric will dry quickly after cleaning/rinsing.

Always test a small, non-visible area before any chemical is used on Auralex products.